Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.
Flat or Dead-Flat Oil - Provides a completely flat, oil-based finish. Generally used on walls but not suitable for areas of high wear.
If you decide to do your own body work discuss it with the paint shop first. They'll probably have recommendations on the type of primer you use. Some brands will be more compatible with their primers or color coats. The rule of thumb is to stay within the same brand of paint, both for prep and color. Even the cheapest paint shops typically use a brand name on their intermediate and higher paint jobs. Find out what it is and use the same brand as your primer coat. This will ensure you don't create adhesion problems for yourself down the road.
Red color belongs to the three main colors (together with blue and yellow). This color has a lot of shades from light pink to reddish brown. Red is an ideal irritant, there is a reason it is used in corrida to irritate the fighting bulls.
You can use vinyl on almost any exterior except previously painted wood. It works fine on wood shingles and shakes, asbestos shingles, brick, stucco, concrete and masonry blocks. One manufacturer says you can even put it on wood clapboard if the clapboard is new and unprimed.
Alkyd is an old interior paint made newly popular by a change in solvent - a super-refined petroleum chemical that has almost no odor. It is not a water paint. You thin it and clean brushes with mineral spirits or turpentine, or, if you want to retain the odorless feature, with the new odorless solvent. (Ask the paint-store man for just that, odorless solvent).
Will the color fade? Now this is a very broad question with various answers. Hair color fading is due to many factors. First of which is, the ability of the hair to hold hair color. We call this porosity. If the hair is overly porous it will have a problem holding hair color. There are ways a stylist can usually alleviate this problem. Once in a while the hair is so damaged it absolutely impossible for the hair to hold color. Your stylist should always have the skills to evaluate these situations, and recommend certain conditioning treatments to bring the hair back to a normal porosity.